Pular para o conteúdo principal

FV Decipher Support

Todos os tópicos, recursos necessários para FV Decipher.

Base de Conhecimento da FocusVision

Adding Fulcrum Automatic Sample

1:  What is Fulcrum Automatic Sample?

Fulcrum by Federated Sample gives you instant access to highly targeted sampling, leading to faster delivery and cost efficiency, as well as broader supplier reach. Decipher is now integrated with Fulcrum, allowing for seamless transition from survey programming to sample fielding.

There is no longer a need to program surveys in Decipher and then re-enter the survey details in Fulcrum. Now, once the survey is programmed in Decipher, the relevant sampling information automatically populates in Fulcrum, decreasing the amount of time it takes to successfully launch a study and increasing project management labor efficiency across the board.

Tip: If you are using Fulcrum sample with another sample source, respondents from the other sample source are shown the Fulcrum questions and their answers are collected in the data.

2:  Adding Fulcrum Automatic Sample

Sample sources can be set up at any point as you build your survey, but for our purpose we'll begin by adding Fulcrum at the very beginning. This will enable us to create our basis for future terminates and quotas in the survey builder.

Contact your Account Manager if you would like Fulcrum Automatic sample enabled in Decipher. They will walk you through the process for getting a Fulcrum account.

2.1:  Add the Sample Source

To begin, click on "Sample Sources" in the question tree and the element will appear in the stage area. Select "Add New Sample Source."

The element window will appear. In the "Sample Sources" tab, select "Custom Sample Source" and click "Insert."

The new Fulcrum Automatic sample source will appear in the question tree grouped under "Sample Sources," and the stage area. Enter the "CPI" and "Total Quota." Then click "Add Fulcrum Question."

2.2:  Add Fulcrum Question(s)

The Fulcrum element library allows you to select the screener questions from Fulcrum. Click on a question to add it and the full question text will appear in the section to the right. Multiple questions may be selected. The search field and sort menu enable you to quickly find the question you're looking for.

Add the questions in the order you'd like them to be asked. Once they're added to the project the order cannot be changed. Some exceptions apply due to Fulcrum's requirements for the order.

To remove a question while you're still editing within the library, simply click on it again and it will no longer appear in the right window.

Once you have the question you'd like, click "Add to Project."

The element will update with a list of your questions, and they will be included in the question tree as well.

2.3:  Removing a Fulcrum Question

To remove a Fulcrum question after you've saved your questions in the survey builder, locate the question in the question tree and right-click on it. Then select "Delete Element."

3:  Add Terminate(s) Based on Fulcrum Question(s)

Once you've added your Fulcrum sample questions, you may add terminate points based on the questions. Add a new terminate element, enter a title and click "New Condition" in the general options.

Terminates (i.e., "Fulcrum Qualifications") edited through the Fulcrum website will not be applied to your survey and will be lost when synced. Create your terminate points within Decipher.

In the menu, the Fulcrum questions are listed in the "external resources" category. Select a question.

Select the answer options that define the terminate. If the source is a number question, enter the value. Mouse-over the info icon to view valid entries for numeric questions.

Select "Save," or "Save as" if you wish to name the condition for later use in the survey builder.

4:  Add Quota(s) Based on Fulcrum Question(s)

Any quotas used for Fulcrum sample should use the Fulcrum Quota Element. This dedicated quota element allows Fulcrum to track their sample, filling only quotas that apply to them. A standard quota element may be used, however it is not recommended when non-Fulcrum sample sources are also being used because Fulcrum cannot differentiate their sample bucket from the others.

Add a new Fulcrum quota element, enter an appropriate title and click "Edit Quota." Specify the maximum number or respondents in the field provided, then click "+Row" to add cells. The Fulcrum questions will be available in the quick quotas or logic conditions. Select a question, then click "OK."

Quotas edited through the Fulcrum website will not be synced or acknowledged in the survey. Create your quotas within Decipher.

For numeric quotas, enter the value and click "OK." Repeat until the cells represent all answer options. Then enter the limits for the cells and save your quota.

Once in place, quotas based on Fulcrum questions may be viewed and edited in the field report, under the Quotas tab.

5:  Syncing with Fulcrum

To sync with Fulcrum, simply open the Project Summary or test the survey (under "Test"). A final sync will also occur when the survey is set live. Post-launch changes must be made in Fulcrum's website, Decipher will not sync again after the initial launch.

If you edit any of the questions, re-sync to update with Fulcrum.

6:  In the Report

The Fulcrum screener questions are fully integrated into Crosstabs and Report 2010, allowing you to create banners, tables, charts and view data just as any other question.

  • Este artigo foi útil?